Instructions

Instructions for use: Please read carefully.                      

NEW ONCE™ Iron On Name Labels

Following these simple instructions will ensure that the name labels stay permanently attached.

  • Turn iron OFF steam setting to “dry mode”.
  • Set the iron temperature between 160-190 degrees or cotton setting.
  • Holding the iron flat, apply heat for 2 to 6 seconds.
  • Use the part of the iron plate where there are NO steam holes. The flat part of the plate gives a more even distribution of heat resulting in the label completely sealing. (No heat comes out of the holes).
  • As you lift the iron, sweep it across the label to make sure the edges are sealed.

Use a thin pressing cloth for delicate fabrics.

PLEASE NOTE - the ONCE™ Iron On instructions differ from our iron on labels. Please ensure you follow the correct instructions for the type of name label you have purchased.                                             

Iron-on labels:

  • Make sure garment is washed and dried before applying label.
  • Peel the label from the backing sheet.
  • Place the label on the garment in desired position.
  • Set iron to ‘dry’ mode (not steam) and heat iron to 130 – 170 degrees (middle or wool setting).
  • Use the part of the iron plate where there are no holes for the most even heat distribution.
  • Place label with the name side up! Holding the iron flat, press name label in place for 10 -15    seconds. DO NOT move the iron around.
  • Allow garment to cool down.
  • Repeat steps 2 and 3 (total of 3 pressings and cooling).
  • Use a thin pressing cloth on delicate fabrics – NOT a tea towel.
  • Do not iron label on to the care label.

To see a short instructional video please click below

 

 

Blank iron-on labels are available to cover labels when clothes are passed on or sent to a charity shop.

Warning: All labels can present a choking hazard for small children if not used correctly or if they become detached. Follow the care instructions on the garment. DO NOT use iron-on labels for garments that are non-iron. Other label options available – contact us for details.

 

Sew-In labels:

Our printed sew-in name tags are similar in material to our iron-on labels, you may at first not believe these are not actually sew-in – but they are!

  • Cut them to the size and shape you want - with no chance of any frayed edges
  • Remove label from backing sheet and place in position (it may feel slightly tacky at first, but this soon goes)
  • Sew-In to garment

.

Stick-on labels:

  • Ensure surface area is dry, clean and free from dust.
  • Remove label from backing sheet and apply to surface.
  • Ensure all edges are firmly smoothed down.

All stick-on labels are dishwasher and microwave safe.

 

Tagg-on labels:

  • Remove the label from the backing sheet and loosely fold in half.
  • Place the ‘pin’ on a hard surface and push garment on to the pin followed by the label. Ensure the ‘pin’ stays straight when garment and label are fixed.
  • Place ‘cap’ over the ‘pin’ and push to the base of the ’pin’.
  • Simply snap off the spike part of the ‘pin’.
  • Remove any excess plastic to leave a smooth surface e.g. with your thumb nail.

 

How to clip-on name labels

To see a short instructional video please click below

Warning: The plastic components of the tagg-on labels as well as the labels can present a choking hazard for small children if not used correctly or if they become detached. Follow the care instructions on the garment. Other label options available – contactus for details.

 

Shoe labels:

  • Ensure surface area is dry, clean and free from dust.
  • Remove label from backing sheet and apply to surface.
  • Ensure all edges are firmly smoothed down.
  • Place clear laminated patches over the labels for protection.

Warning: All labels can present a choking hazard for small children if not used correctly or if they become detached. Follow the care instructions on the garment. Other label options available – contact us for details.

Contact Us

01684 472247
Basepoint Business Centre
Oakfield Close
Tewkesbury
GL20 8SD
ENGLAND

The Name Label Company

This care site is operated by The Name Label Company. Using our knowledge and experience we’ve designed this range of name labels specifically for the needs of care home residents.

Visit The Name Label Company